Fluke 754 Documenting Process Calibrator-HART
$10,000.00
Typical Applications:
• Field calibration and documentation of HART-enabled process instruments
• Configuration, calibration, and troubleshooting of smart transmitters
• Loop testing and validation in process industries
• Maintenance and commissioning tasks requiring documented results
Not Recommended For:
• Simple signal testing without documentation needs
• Applications without HART communication requirements
• Laboratory reference calibration requiring ultra-high accuracy
The Fluke 754 is more than just a calibrator. Its built-in HART interface lets you perform nearly all digital communicator tasks. Easily handle fast-pulsed RTD transmitters and PLCs, custom auto-step and ramping, custom units, programmable measurement delay, and one- or two-point switch testing—all with one device.
Fluke 754 Documenting Process Calibrator-HART | Data sheets
Selection Notes
• Confirm that a documenting process calibrator with HART support is required
• Designed for calibration, configuration, and troubleshooting of smart instruments
• Supports automated test procedures with recorded calibration results
• Suitable for maintenance, commissioning, and quality assurance programs
• Regular verification ensures reliable calibration documentation
Why Choose the Fluke 754 Documenting Process Calibrator-HART
• Integrated HART communication for smart transmitter configuration
• Automated documenting calibration for improved efficiency and traceability
• Measures, sources, and simulates common process signals
• Designed for field technicians, calibration engineers, and auditors
Key features
- Complete pressure, temperature, and mA loop calibrator
- Troubleshoot and calibrate HART smart digital transmitters
- Create calibration procedures and automatically document results
- Connect to calibration management software
Why Choose the Fluke 754?
- Multi-function capability: Source, simulate, and measure pressure, temperature, and electrical signals—all in one handheld tool.
- Integrated HART communication: Calibrate and maintain HART smart transmitters and instrumentation without a separate communicator.
- Bright dual display: View sourced and measured parameters at the same time for faster, error-free work.
- Long battery life: Rechargeable Li-Ion battery delivers up to 10 hours of operation, plus direct AC power support.
- Seamless documentation: Automate calibration procedures, store results, and ensure compliance with ISO 9000, FDA, EPA, and OSHA standards.
- Portable and rugged: Designed for demanding industrial environments.
FAQ
Q: What is the advantage of HART support in the Fluke 754?
A: HART support allows configuration, diagnostics, and calibration of smart transmitters directly from the calibrator.
Q: Can the Fluke 754 store calibration results?
A: Yes. It documents and stores automated calibration test results for traceability.
Q: Is the Fluke 754 suitable for field calibration work?
A: Yes. It is designed for portable on-site calibration and documentation.
Q: Can you help confirm if this calibrator fits my smart instrument calibration needs?
A: Yes. Our engineers can review your instruments and recommend the right solution.
| Operating temperature | -10°C to +50°C |
|---|---|
| Storage temperature | -20°C to +60°C |
| Dust/water resistance | Meets IP52, IEC 529 |
| Operating altitude | 3000 m above mean sea level (9842 ft) |
| Agency approvals | CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993 |
| Size | 136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in) |
| Weight | 1.2 kg (2.7 lb) |
| Batteries | Internal Battery Pack Li-ion: 7.2V,4400mAh, 30 Wh |
| Battery life | >8 hours typical |
| Battery replacement | Replace without opening calibrator; no tools required |
| Data storage capacity | 1 week of calibration procedures results |
Related products
-
-
Flow MeasurementEndress+Hauser Deltabar PMD75B – differential pressure transmitter
$950.00 Add to cart -
Flow MeasurementEndress+Hauser Electronic differential pressure Deltabar FMD71
$2,800.00 Add to cart -
Pressure MeasurementVEGABAR 86 Submersible pressure transmitter with ceramic measuring cell
$1,200.00 Add to cart
Reviews
There are no reviews yet.