Endress+Hauser FLOWSIC200 IFL200 ultrasonic flow measurement instrument
$4,800.00
The FLOWSIC200 is used for the contact-free and accurate measurement of flow velocity and flow direction inside tunnels or exhaust ventilation ducts. Ultrasonic technology provides the cross-sectional mean average value of the flow velocity. This device is used for measurement necessary for optimal ventilation control and reducing running costs to a minimum when air flow is dictated by climatic conditions or by traffic.
FLOWSIC200 IFL200 ultrasonic flow measurement instrument
The tunnel flow velocity measuring device for long-term operation
Specs at a glance
-
Measured variables
Flow velocity, Direction of flow, temperature
-
Measuring range
Flow Velocity: 0 … ± 20 m/s
-
Conformities
RABT 2006
ASTRA “Guideline – Ventilation of Road Tunnels” (2008)
RVS 09.02.22
Field of application
The FLOWSIC200 is used for the contact-free and accurate measurement of flow velocity and flow direction inside tunnels or exhaust ventilation ducts. Ultrasonic technology provides the cross-sectional mean average value of the flow velocity. This device is used for measurement necessary for optimal ventilation control and reducing running costs to a minimum when air flow is dictated by climatic conditions or by traffic.
-
Measurement in road and railway tunnels
-
For control of tunnel ventilation
-
For detection of smoke propagation
Device properties:
-
Very large measuring distances possible
-
Non-contact measurement
-
Extremely rugged components made of titanium, stainless steel, or die cast
-
Versions for very corrosive tunnel atmospheres
-
Determination of flow direction
-
No mechanical moving parts
Benefits
-
Representative measurement across total tunnel width
-
Very reliable measurement, compared with punctual measurement methods
-
Accurate measurement even of very low flow velocities
-
Long maintenance intervals of up to 5 years
-
Low operating costs due to reliable operation and low maintenance
-
High availability of devices and, therefore, of measurement data also
| Measuring principle | Ultrasonic transit time difference measurement |
|---|---|
| Measured variables | Flow velocity, Direction of flow, temperature |
| Measuring range | Flow Velocity: 0 … ± 20 m/s |
| Operating pressure range | –100 hPa … 100 hPa |
| Nominal pipe size | FLOWSIC200 M, FLOWSIC200 H-M:3.5 m … 22 m FLOWSIC200 H:3.5 m … 35 m |
| Conformities | RABT 2006 |
| Outputs | 1 output: |
| Digital Outputs | 5 relay outputs (change-over contacts), potential-free: |
| Digital communication | RTU RS-485 |
Reviews
There are no reviews yet.