E+H Proline Promag P 100 5E1B electromagnetic flowmeter
$2,000.00
The Endress+Hauser Proline Promag E 100 (5E1B) is a reliable electromagnetic flowmeter designed for standard applications involving conductive liquids. It provides stable and accurate flow measurement while maintaining a compact and lightweight design.
This device is ideal for basic process monitoring where cost efficiency and dependable performance are essential. In addition, it supports seamless integration into automation systems through digital communication interfaces.
Typical applications include water treatment, utility systems and general industrial processes.
Not Recommended For:
• Non-conductive liquids such as oil or gas
• Highly corrosive or extreme temperature environments
Selection Notes
• Confirm that the medium is electrically conductive, which is required for electromagnetic measurement
• Verify the flow range, depending on pipe size and process conditions
• Choose appropriate liner material, typically PTFE, based on chemical compatibility
• Check the process temperature, usually up to around +130 °C
• In addition, ensure the pressure rating and pipe size match your system requirements
Why Choose the Promag E 100
• Reliable Measurement Performance
The device delivers stable and repeatable readings for conductive liquids. Therefore, it is suitable for daily process monitoring.
• Compact and Space-Saving Design
Its lightweight construction allows installation in confined spaces. As a result, it fits easily into existing systems.
• Cost-Effective Solution
This model focuses on essential functions. Consequently, it offers a good balance between performance and price.
• Maintenance-Free Operation
There are no moving parts inside the sensor. This design reduces wear and minimizes maintenance requirements.
• Flexible Communication Integration
It supports outputs such as 4–20 mA, HART or Modbus. In addition, integration with PLC or DCS systems is simple.
• Stable Measurement Independent of Process Conditions
The electromagnetic principle is unaffected by density, pressure or viscosity. Therefore, measurement remains consistent under changing conditions.
FAQ
Q: What media can Promag E 100 measure?
A: It measures conductive liquids, including water, wastewater and process fluids.
Q: What is the measuring principle?
A: It uses electromagnetic induction (Faraday’s law) to determine flow velocity and volume.
Q: What outputs are available?
A: The device supports 4–20 mA, HART and Modbus communication, depending on configuration.
Q: Does it require regular maintenance?
A: No. Because it has no moving parts, maintenance needs are very low.
| Nominal diameter range | DN 15 to 600 (½ to 24") |
|---|---|
| Wetted materials | Liner: PFA, PTFE |
| Measured variables | Volume flow, conductivity, mass flow, corrected volume flow, corrected conductivity |
| Max. measurement error | Volume flow (standard): ±0.5 % o.r.± 1 mm/s (0.04 in/s) |
| Measuring range | 4 dm³/min to 9600 m³/h (1 to 44 000 gal/min) |
| Max. process pressure | PN 40, Class 300, 20K |
| Medium temperature range | Liner material PFA: –20 to +150 °C (–4 to +302 °F) |
| Ambient temperature range | Flange material carbon steel: –10 to +60 °C (+14 to +140 °F) |
| Sensor housing material | DN 15 to 300 (½ to 12"): AlSi10Mg, coated |
| Transmitter housing material | AlSi10Mg, coated |
| Degree of protection | IP66/67, type 4X enclosure |
| Display/Operation | 4‐line backlit display available (no local operation) |
| Outputs | 4‐20 mA HART (active) |
| Digital communication | HART, PROFIBUS DP, Modbus RS485, EtherNet/IP, PROFINET |
| Power supply | DC 20 to 30 V |
| Hazardous area approvals | ATEX, IECEx, cCSAus, INMETRO |
| Product safety | CE, C-Tick |
| Metrological approvals and certificates | Calibration performed on accredited calibration facilities (acc. to ISO/IEC |
| Marine approvals and certificates | LR approval, DNV approval, ABS approval, BV approval |
| Pressure approvals and certificates | PED, CRN |
| Material certificates | 3.1 material |
| Hygienic approvals and certificates | Drinking water approval: ACS, NSF 61, WRAS |
Reviews
There are no reviews yet.