Endress+Hauser Absolute and gauge pressure Cerabar PMP75
$700.00
The Cerabar PMP75 digital pressure transmitter with metal diaphragm seal is typically used in process and hygiene applications for pressure, level, volume or mass measurement in liquids or gases. Suitable for high pressure as well as extreme process temperature applications from -70 up to +400°C (-94 to 750°F). Quick Setup with adjustable measuring range allows simple commissioning, reduces costs and saves time. Designed according to IEC 61508 for use in SIL2/3 safety applications.
Absolute and gauge pressure Cerabar PMP75
Digital pressure transmitter with fully welded diaphragm seal for measurement in gases or liquids
Specs at a glance
-
Accuracy
0,075% + influence of diaphragm seal
-
Process temperature
-70°C…400°C
(-94°F…752°F) -
Pressure measuring range
400 mbar…400 bar
(5.8 psi…6000 psi) -
Process pressure / max. overpressure limit
1050bar (15,200psi)
-
Main wetted parts
Alloy C276
316L
Monel
Tantalum
PTFE-Foil -
Max. measurement distance
7000m (22.966ft) H2O
-
Material process membrane
316L, AlloyC,
Tantal
Rhodium> Gold
PTFE -
Measuring cell
400 mbar…400 bar
(5.8 psi…6000 psi)
relative/ absolute
Field of application
The Cerabar PMP75 digital pressure transmitter with metal diaphragm seal is typically used in process and hygiene applications for pressure, level, volume or mass measurement in liquids or gases. Suitable for high pressure as well as extreme process temperature applications from -70 up to +400°C (-94 to 750°F). Quick Setup with adjustable measuring range allows simple commissioning, reduces costs and saves time. Designed according to IEC 61508 for use in SIL2/3 safety applications.
Two chamber aluminum or stainless steel (316L) housing.
-
Process connections: Threads, flanges or hygienic connections
-
Process temperature: -70 to +400°C (-94 to +752°F)
-
Pressure: -1/0 up to 400bar (-15/0 up to +6,000psi)
-
Accuracy: ±0.075%
-
International explosion protection certificates, overfill prevention WHG, SIL, hygienic approvals, marine approvals
Benefits
-
Large variety of different process connections and membrane materials
-
New TempC Membrane minimizes influences of ambient and process temperature fluctuations
-
HistoROM data management concept for fast and easy commissioning, maintenance and diagnostics
-
Easy menu-guided commissioning via local display, 4 to 20mA with HART, PROFIBUS PA, FOUNDATION Fieldbus
-
Highest safety due to gas tight feedthrough with capabilities up to SIL2/3, certified to IEC 61508
-
Cost savings with modular concept for easy replacement of sensor, display or electronics
-
Overload-resistant and function-monitored from the measuring cell to the electronics
| Measuring principle | Absolute and gauge pressure |
|---|---|
| Characteristic | Digital transmitter with piezoresistive sensor and diaphragm seal |
| Supply voltage | 4…20 mA HART |
| Reference Accuracy | 0,075% + influence of diaphragm seal |
| Long term stability | 0.05 % of URL/ year |
| Process temperature | -70°C…400°C |
| Ambient temperature | -50°C…85°C |
| Measuring cell | 400 mbar…400 bar |
| Smallest calibratable span | 5 mbar (0.075 psi) |
| Vacuum resistance | 10 mbar (0.15 psi) |
| Max. Turn down | 100:1 |
| Max. overpressure limit | 1050 bar (15.750 psi) |
| Process connection | Thread: |
| Process connection hygienic | Tri-Clamp |
| Material process membrane | 316L, AlloyC, |
| Material gasket | None, diaphragm welded |
| Fill fluid | Silicone oil, |
| Material housing | Die-cast aluminum, |
| Communication | 4…20 mA HART |
| Certificates / Approvals | ATEX, CSA C/US, IEC Ex, JPN Ex, INMETRO, NEPSI, EAC |
| Safety approvals | SIL |
| Design approvals | EN10204-3.1 |
| Hygienic approvals | 3A, EHEDG |
| Marine approvals | GL/ ABS |
| Specialities | Diagnostic functions |
| Successor | PMP71B |
Reviews
There are no reviews yet.